Customer Reviews of Asahipen Paint Sprayer ST
The reviews are automatic translation.
Showing 1 - 12 of 12 Reviews
When painting for the first time
On 2018-05-12 16:51:58
It is a bit bad Buy electric for the first time because it is hard to pull the air The sound is quite large as the other says the sound is big Because it is a suburb, it does not cause inconvenience in the neighborhood It may be annoying if it is a residential area in the city I thought it was bad After several seconds it will be "woven" and paint will not come out It will be sticking of the paint to the instructions! but The piston does not move when I try it for the first time use When pulling or pushing by hand There is hit in inside I pushed and did not come back Try to move it by pushing it many times by hand The feel of hitting in the middle will not go away Although it may be a bad defect in rare cases That's too bad. I wonder if I can use it for a bit in the future even for DIY.
When painting work
On 2018-05-01 19:50:24
I can not use it in 1 minute by using it. The viscosity of the paint is exactly one blown tightly together. The instructions are difficult to understand. I do not even mention where to connect anywhere. This time it was used in conjunction with an unknown nozzle, but the performance of the spraying machine (what product is unknown) used 30 years ago was better. I truly feel like I threw money away in the dove.
When painting work
On 2017-10-24 16:12:39
The setting and maintenance became easier than the one used conventionally, painting time became shorter. Just because I was concerned about the large sound, I am slightly satisfied.
Used for maintenance of pump equipment
On 2017-06-21 15:07:27
It scattered with some wind and it did not get wet as I thought. Occasionally clogging occurs when there is a dam, Old materials need attention I will challenge for a while until I learn the trick.
Painting of the roof
On 2017-04-28 22:47:53
Actually using it, I'm pretty much concerned with the operating sound. Other than that, I could use it without problems if I think from the amount. (Although it is the trial blowing degree ...) In addition to the vertical surface, the flexible nozzle was useful.
Painting of shutters
On 2017-03-08 17:47:33
Even though the price is cheap, it is very satisfying to be painted cleanly and quickly. Also, it was easy to handle.
Painting of iron work products
On 2015-10-21 09:37:48
Spray work is quite early. And beautiful. If there is no problem with the noise and scattering of the paint, it seems to be enough to use it.
Mainly painting railings
On 2015-10-10 09:29:41
If the balloon paint does not diffuse, the paint will concentrate on one point and become a solid, and it will not paint cleanly. If you remove clogging, clothes well, wash paint and remove it, it will take time for maintenance.
Painting after indoor metal processing
On 2015-09-22 21:40:05
Because of significant change in usage, it takes time and cost for re-production, so it was used for local metal processing. Since red and yellow are paint-free with hand painting, it is an impression that I tried this product. Using the white lacquer spray on the undercoat, the product was less powerful than the air spray gun, but because it is indoors, it was good in reverse. Although the particles are large, they are cleaner and faster than hand painted. I was praised by the person in charge of the customer's maker. I am satisfied. However, there are 50 Hertz and 60 Hertz, so I wonder if I can take it home w
Painting at home
On 2015-06-13 16:58:08
This time I purchased an electric spray machine for the first time. Although it is an impression after use, I think the daytime is preferable because the electric sound is a little big. When I tried to make the viscosity of the paint a little darker, I could spray evenly without clogging. Since it will not come out when spraying while tilting the main body, it is very convenient if there is a dedicated flexible nozzle (ST - FN). I used it because I wanted to paint a place with an angle. Although I thought that disassembly cleaning was serious, I could easily remove each part part and clean it smoothly. There are other electric spray products of other companies, but I thought whether things that can be disassembled and cleaned are good if they purchase. Since there are after parts, I think that it can be used for a long time. Paints manufacturer Ashappen I thought this price was very cost effective product.
Can spray or more · Small-scale painting below Eg compressor
On 2014-04-11 19:04:58
It was used to paint the entire inside of the home warehouse with waterborne paint but stopped / broke down in just 3 minutes of use. <Cause / Improvement> - When looking at the cylinder part, paint adhered to the piston shaft and it was stuck. · There is no coping method fixed in the manual. · The attached oil did not cope with this problem. · As a result of trial and error, using W fluorocarbon oil caused problems. If we overcome the above defects / deficiencies, the degree of painting is satisfying with the work beyond price.
Spraying of air conditioner detergent
On 2013-05-07 16:48:20
The sound is so noisy, I am surprised at the beginning. As for how to use other than paint, since it will give a reasonable amount for spraying, it seems to be variously usable.
Customers Who Viewed This Item Also Bought
3.99 - 4.99 SGD
SAN-EI Faucet Mfg
16.99 - 55.99 SGD
GIFU SANKEN KOGYO (UKAI)
269.99 - 339.99 SGD
Taiyo Seiki Iron Works
23.99 - 71.99 SGD