Customer Reviews of Car Stopper
The reviews are automatic translation.
Showing 1 - 20 of 85 Reviews
On 2017-11-04 17:48:27
Installation requires vibration drill and anchor, but it is very satisfying to secure surely.
DIY Maintenance work
On 2017-10-06 09:45:47
I bought it to the wheel stopper of the garage. Since the floor is concrete, I pasted it with an adhesive, but it is okay.
Garage tire stop
On 2017-09-06 19:08:04
The anchor diameter is 10 mm. Drill diameter is required about 10.5 mm. The seismic intensity drill for home is a tiresome diameter. After driving the anchor, it is necessary to fix with a punch-shaped tool. It is also necessary to tighten the bolt with a socket wrench. I could fix it enough.
Parking lot parking lot
On 2017-09-06 16:58:43
Functionally there is no problem at all Anchor bolt and bolt cap are also attached and I think that it is affordable But as soon as I remove the tape attached to the product, I will ask for improvement
Used for garage
On 2017-09-03 09:04:13
For now it will secure the tire firmly. There are 12 mm pilot holes, but it was too large at 12 mm. Thanks to that, we could not secure the body firmly.
On 2017-05-31 08:56:12
I purchased it because I thought that older people falling down and making head injuries should not cause serious injury.
As a stop.
On 2017-05-23 00:25:09
Since there are burrs on the outer circumference on the ground plane side and it is decocted, a gap can be formed by grounding it on a flat surface. Although burrs can be easily cut with a cutter, since thin wires are in place in some places, they have to be cut with nippers. Nevertheless there is warpage so do not touch it exactly. However, it is a part that can not be seen, and it will not be known if it is fixed with bolts.
Use for parking lot
On 2017-05-03 10:44:20
Since it is made of rubber, I bought it as if there was no damage to the tire even if I hit it vigorously. I asked the installer to install.
Change of parking position accompanying scaffold assembly
On 2017-03-29 17:22:59
The attached asphalt nail, which was more robust than imagined, is so soft that it is necessary to drill a prepared hole
Used in the parking lot of the house
On 2016-11-19 20:19:24
Always used to put it in the parking space with back. Since our parking space is narrow, our house is installed so that about 10 cm from the outside of the main body meshes with the tire. Therefore, it can not back with fluorescent reflection display as a marker. If you can freely change (change) the label position of fluorescent reflection display, I think that it is more convenient to use. The function of securing the stop position of the car is satisfactory enough
Maintenance of the house
On 2016-10-09 11:16:56
Even if my wife entered the garage, I could not hit the bumper, so I wish I had bought it sooner.
To the parking lot.
On 2016-08-26 16:24:01
I opened the hole for inserting the plug, the pitch of the two places slightly misaligned, it was hard for the stop bolt to get in well and it was hard. I think that it would be better if you opened the kitchen with a narrow drill. Goods are satisfactory if you consider the price.
For the parking lot at home
On 2016-07-28 16:59:36
I only placed things like concrete sleeper in the neighborhood home center, so I found this and purchased it here. Since I am riding a bicycle or a motorcycle as a sport, I use mind on the surface of the tire. So, there is a slight resistance to hit the tire to a square-shaped one like a sleeper of a concrete, and in this point, the part where the tire hits is oblique and feeling gentle on the tire surface I will do. I think that it is a good product.
I wanted a cheap car stop for the time being.
On 2016-07-07 12:15:23
To the parking lot stop. It does not break like concrete products. It is a pity that the price has risen from the beginning of purchase and the merit of purchasing at a low price became thin.
I use it for the wheel stop of the garage.
On 2016-04-13 11:03:06
I fixed it tightly, I used it for parking a normal car, but it took a lot of strength to drive, but I was able to fix it tightly.
I installed it so that I do not back too much in the garage.
On 2016-04-12 19:29:36
I bought for asphalt, I needed quite a bit of effort but I was using it for parking a normal car, but I can use it for parking a normal car but there is no rattling and I can feel comfortable backing, other cars in my house I am planning to add as much as possible, thank you.
A wheel stopper
On 2016-02-16 16:48:00
I wish it was flat on the bottom part a bit more. It made a flat file to some extent and glued with concrete bond. I will wait for it to dry!
Used for stopping
On 2016-02-07 16:39:54
It took a while to find the cap that closes the hole in the anchor pin, attaching it to the back side of the product. Please attach it to a place that is easy to see from the next time. This is not an impression, but for the reasons above I forgot to remove one piece (cap 2 pieces) and fixed it, the cap has run out. Can I order separately?
Installation to a new parking lot, installation.
On 2016-01-27 21:45:15
The anchor is hard to see, and it took time to install.
Car stop installation for parking lot
On 2015-12-23 17:51:52
I think that it is a kind item with anchor and fixing bolt.
Customers Who Viewed This Item Also Bought
54.70 - 67.24 SGD